15

Does a game-loss triggered by meeting the conditions presented by CR 121.4 have a particular name, or rather is there a technical (or slang) word that indicates a loss via this condition?

  • 4
    I've heard the term 'milled out' when the deck was actively thrown into the graveyard during the game, but I have no sources with this and it may have been regional. – Mast Sep 23 at 6:11
32

Yes, the slang term is "to deck" or "to deck out"

Decking, decking out

You can use the term transitively or intransitively, i.e. you can say "I decked (out)" meaning you lost due to drawing from an empty library, or "I decked (out) my opponent", meaning you won by milling your opponent to death.

Personally, I've only ever heard "to deck", but apparently both are used.

| improve this answer | |
  • 6
    In my experience "decked out" is less common than "decked" when there is an object attached (ie "I decked my opponent" is more common than "I decked out my opponent") – Arcanist Lupus Sep 22 at 19:11
  • @ArcanistLupus Interesting that outside of the context of MTG, both of those terms have very different meanings. "Decked out" generally means "lavishly decorated", while "decked" means "knocked to the ground". (Both work either transitively or intransitively in this case.) – Darrel Hoffman Sep 23 at 16:54
  • 2
    Never once heard "decked out". Played for over a decade. More common usage would be "I almost got decked/I almost decked them". – Our_Benefactors Sep 23 at 20:39
  • 1
    @Our_Benefactors I've found that which gets used depends a lot on the exact group. Some I've played with prefer 'decked out', others prefer just 'decked', but most seem to understand both. I suspect some influence here from other games as well, as there are at least a few where one or the other is the term for that type of loss per the actual rules. – Austin Hemmelgarn Sep 24 at 11:42
  • I've only ever heard "decked out" for the other player, although sometimes I've heard just "decked" for doing it to yourself. That is, "I decked him out", but never "I decked him" (except once when they meant they literally punched their opponent, anyway); but "I decked myself" and "I decked myself out" were about equal. SouthEast US here. – gatherer818 Sep 25 at 5:58
16

Informally known as "decking yourself" (or your opponent). For example, see ChannelFireball's Temur Reclamation deck guide:

Be careful to not deck yourself.

(Yes, that is Hall of Famer LSV decking himself after not checking his deck)

| improve this answer | |
  • 2
    Decking yourself applies only when your own draws cause your deck to empty - if an opponent mills you (or causes mass draw) it's just decking out. – Andrew Sep 22 at 18:47
  • 10
    Check yourself before you deck yourself. – Hackworth Sep 22 at 18:50
  • 1
    I don't think "decking yourself" applies when an opponent causes you to get into this situation. – Joe W Sep 24 at 16:22
2

The actual event of losing the game is getting decked. You may also hear the term "mill". That term originated with the card Millstone, which moved cards from a player's library to their graveyard, and until recently it was an informal term for removing cards from a library, and could be ambiguous as to whether it referred to moving the cards to the graveyard, drawing them, exiling them, etc. However, in M21 (released in 2020), "mill" was made a keyword specifically referring to moving cards from a player's library to their graveyard. Thus, while forcing a player to draw cards does remove cards from their library, it is not milling. Milling does not directly cause a game loss; only when the player is required to draw from their empty library do they lose. However, decking and milling are still closely connected, since milling sets a player up to deck themselves.

| improve this answer | |
  • "However, in 2021" My calender is still in 2020. When did this happen? – Mast Sep 25 at 7:40
  • 1
    @Mast in the core set M21, pronounced "Magic 2021", which released in 2020 – Caleth Sep 25 at 9:23
  • @Caleth Ah, set 2021. It looked like it referred to a date. – Mast Sep 25 at 9:45

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.